Inspection cycle
1. Check once a week: According to the provisions of the "Electric Power Safety Work Regulations" and national standards, the inspection cycle of electrical tools is six months. Although this is a general regulation for electrical tools, considering that the power cord is an important part of the electrical system, it is recommended to conduct a visual inspection once a week to ensure that the power cord has no obvious signs of damage, wear or aging.
2. Check once a month: When conducting a comprehensive inspection of the Tripod Lighting Tower every month, a detailed inspection of the power cord should be included. Check the power cord for cracks, wear, aging or damage, and ensure that the connection is firm and there is no looseness or poor contact.
3. Check once a quarter: When performing maintenance on the Tripod Lighting Tower every quarter, the insulation performance of the power cord should be checked. The insulation resistance of the power cord can be measured with an insulation resistance tester to ensure that it meets safety standards.
Inspection content
1. Appearance inspection: Check the power cord for signs of cracks, wear, aging or damage.
2. Connection inspection: Ensure that the power cord is firmly connected and there is no looseness or poor contact.
3. Insulation performance check: Use an insulation resistance tester to measure the insulation resistance of the power cord to ensure that it meets safety standards.
