How to Adjust the Verticality of a Portable Camera Telescopic Mast?

Nov 28, 2025

Leave a message

1. Basic Preparation

Choose a flat surface and ensure the mast base is stable. If using a guy line, a spacing of 1-1.5 meters between ground stakes is recommended.

Hook the guy line hook into the ground stake ring and adjust the tension until the mast can rise and fall smoothly without noticeable wobbling.

2. Manual Mode Adjustment

Insert the hand crank and raise the mast evenly clockwise while observing the verticality. If any deviation is found, fine-tune the tension using the guy line box.

The allowable verticality deviation is 1/250 of the mast height. A re-inspection is necessary after a trial lift.

3. Electric Mode Adjustment

Connect the power cord (12V/24V) and operate the raising and lowering mechanism using the remote control. Ensure stable voltage to avoid abnormal raising and lowering.

After raising to the maximum position, lock the guy line locking pin to secure the mast.

4. Precautions

The mast must be kept vertical. Horizontal or inverted use is prohibited.

The load should not exceed 30-80kg to avoid excessive local stress.

The tilt angle must be controlled within 25°, otherwise it may not be able to be lifted or there may be safety hazards.

Tripod Telescopic Camera Mast