1. Installation Preparation
Base Fixing: Place the light tower on a level surface and lock the casters to prevent rolling.
Component Connection: Align the lamp head with the lifting cylinder shaft and tighten the locking screws, then connect the aviation plug and power plug.
Power Check: Ensure the generator load switch is in the off position, and the mains power or solar system wiring is correct.
2. Lifting Operation
Pneumatic Lifting: Control the three-stage aluminum alloy lifting rod using a dedicated air pump or manual air valve. Maximum height is 4.5 meters, lifting time ≤50 seconds.
Remote Control Adjustment: Wireless remote control within 50 meters allows for up and down movement and 270° rotation of the lamp head, supporting independent control of each lamp.
3. Lighting and Maintenance
Lighting Range: 4-6 200W LED lamp heads cover a radius of 45-65 meters, supporting large-area, multi-angle lighting.
Regular Maintenance: Annually check the steel cable reel for rust prevention, replenish gear oil, and test the control system functions.
4. Special Scene Adaptation
Vehicle Mounting: Vehicle roof or external mounting requires a customized housing; extended height can reach 12 meters, ensuring stability.
Emergency Use: Prioritize solar or hydrogen-powered models to reduce noise pollution and adapt to disaster relief environments.
Precautions
Keep 5 meters away from the light pole during operation; abnormal situations require professional handling.
High-mast lighting systems require tools such as winches and steel cables; the installation process is complex, and professional team operation is recommended.
