1. Indoor Track/Ceiling Telescopic Light Pole Installation (Suitable for shops, showrooms, and industrial workshops)
✅ Applicable Products: Hanging systems for track lights, spotlights, and supplementary lighting
✅ Features: No drilling required, height adjustable, supports fine-tuning focus
Installation Steps:
1. Determine the installation location. Mark the hanging points of the light pole according to the lighting requirements. Use a laser level to ensure alignment at multiple points and avoid tilting.
2. Install the top fixing components. Secure the universal joint or flange to the pre-embedded parts in the ceiling. Tighten the bolts but do not completely lock them, leaving room for fine-tuning.
3. Connect the telescopic pole and make initial adjustments. Insert the telescopic pole into the fixing components, loosen the damping ring, and let the light body hang naturally for a few seconds to allow the steel cable to center and eliminate initial offset.
4. Leveling and Locking: Apply the included leveling patch to the side of the lamp body. Hold the pole with one hand and tighten the middle damping ring with the other until the resistance is even. Then, before locking the bottom retaining ring, gently slide the lamp head twice to complete the internal slide rail engagement.
5. Final Locking and Testing: Fully lock all interfaces. Manually shake the lamp pole gently to check for wobbling. Adjust the lamp head angle to the target area.
⚠️ Key Note: The aluminum alloy pole body can bear a weight of up to 1.8kg. Avoid overloading to prevent sagging or structural fatigue.
2. Outdoor High Pole/Courtyard Telescopic Light Pole Installation (Suitable for courtyards, sports fields, and camping light stands)
✅ Applicable Products: Pole-mounted streetlights up to 4 meters high, adjustable-height courtyard lights
✅ Features: Requires foundation fixation; emphasizes wind resistance and settlement prevention
Installation Steps:
1. Excavate the foundation pit: Depth ≥ 80cm, diameter ≥ 50cm. Lay a 10cm layer of gravel at the bottom to enhance drainage and prevent subsidence after rain.
2. Pre-embed the flange and level it: Place the thickened galvanized flange in the pit, calibrate it with a level to ensure it is completely level, and then pour C20 or higher grade concrete.
3. Curing and backfilling: After 72 hours of initial setting, backfill in layers and compact the soil to avoid voids that could cause the pole to tilt.
4. Pole connection and fixing: Hoist the light pole onto the flange, align the bolt holes, and tighten with high-strength bolts. The torque must meet the manufacturer's standards.
5. Wiring and Debugging: Ensure proper waterproofing and sealing when connecting cables. Test the light angle and control functions after powering on.
⚠️ Key Note: The design of the embedded parts with horizontal scale grooves significantly improves installation efficiency and accuracy.
3. Rapid Installation Structure for Municipal Streetlight Poles (Suitable for urban roads and smart lighting systems)
✅ Applicable Technology: Based on the patented "A Streetlight Pole Installation Structure and Installation Method"
✅ Features: Modular, quick-installation design improves construction efficiency
Installation Process:
1. Pre-installation of Telescopic Insert Plate: Workers rotate the reel to wind up the telescopic cable, retracting the telescopic insert plate into the telescopic groove, compressing the telescopic spring, and then fixing the mounting base to the ground.
2. Precise Alignment of the Light Pole: Use a crane to align the bottom of the light pole with the mounting base, ensuring the insertion groove and telescopic insert plate are aligned.
3. Release Locking Mechanism: Reverse the pawl through the inspection port to disengage it from the ratchet. The telescopic spring automatically pushes the telescopic insert plate out, locking it into the slot on the inner wall of the light pole.
4. Electrical Connection and Acceptance: Complete the wiring for the power supply and intelligent control system, and conduct remote dimming and fault detection tests.
✅ Advantages: No on-site welding or lengthy calibration is required; a single person can complete the deployment of an entire row of light poles within 20 minutes.
4. No-Drill Telescopic Rod Installation (Suitable for shower curtain rods, curtain rods, temporary lighting racks)
✅ Applicable Scenarios: Rental properties, temporary exhibitions, environments where wall structure cannot be damaged
✅ Features: Relies on friction + adhesive fixation
Installation Points:
Clean the wall surface and ensure it is dry and free of oil;
Apply special structural adhesive to the base, press it against the wall for 2-3 minutes, and use tape to assist in fixing if necessary;
Wait 5-7 days for complete curing before installing the rod body to avoid premature stress that could cause it to fall off;
During installation, ensure that the internal locking structure (such as a crescent lock) is not lost, and ensure it locks securely after extension or retraction.
⚠️ Risk Warning: This type of installation has limited load-bearing capacity and is only suitable for lightweight lighting fixtures or non-critical lighting.