1. Remove the support feet: First, remove the pins securing the support feet on both sides of the rear of the vehicle. Pull the support feet out to the appropriate position, then reinsert the pins to lock the telescopic length.
2. Adjust the height: Use the rocker arm connected to the screw mechanism of the support feet. Rotate clockwise or counterclockwise to gradually adjust the height of the support feet until the vehicle is stable, the wheels are completely off the ground, and the weight is supported by the support feet.
3. Level the equipment: Using a level, adjust the height of the three support feet to center the bubble in the spirit level. Ensure the lighthouse is vertical to prevent tilting or tipping during raising and lowering.
4. Reinforcement measures: When working on soft or uneven ground, install hard pads under the support feet to distribute pressure. In windy conditions (wind force exceeding level 6), shorten the height of the light pole or use ground anchors to enhance stability.
⚠️ Do not stand under the light pole during adjustment. Ensure no personnel are nearby to avoid accidents caused by equipment instability.
