Knowledge

Daily maintenance 1. Keep clean: Regularly remove dust, oil, etc. on the surface of the motor to prevent dust accumulation from affecting heat dissipa

1. Daily maintenance After each use: clean the dirt on the surface of the pole to prevent corrosion. Before, during and after each shift: check whethe

1. Grounding resistance test requirements Grounding resistance value: According to the "Construction Quality Acceptance Code for Building Electri

Foundation acceptance and preparation 1. Foundation acceptance: Before installing Telescopic Light Mast, the concrete foundation should be inspected t

1. Preparation before installation: Check whether the pneumatic components are damaged during transportation and comply with various technical require

1. Duration of remote operation Battery life under laboratory conditions: Under laboratory conditions, using four 18650 lithium batteries (3350mAh) fo

1. Battery capacity and battery life Low power design: Some low-power wireless camera designs can significantly extend battery life. For example, by o

1. Equipment replacement cost Lamp replacement: Although LED lamps have a long lifespan, they still need to be inspected and replaced regularly. The r

1. Preparation before installation Check the windproof cables: Make sure that the windproof cables are not damaged or deformed, the length is appropri

Choose the Emergency Lighting Tower power 1. Determine the power according to the lighting area: the larger the lighting area, the higher the power re

Inspection cycle 1. Check once a week: According to the provisions of the "Electric Power Safety Work Regulations" and national standards, t

1. Daily maintenance After each use: check whether the connecting bolts of each part are loose, and check whether the appearance of the lamp head, lam